YeniCraftRank SitesA free website and storeMake yours ›
1.10.41CraftRank Launcher is out İndir ›AshlarFree server software built on Paper, with DDoS and backdoor protection See Ashlar ›Sunucu sahipleriYour own launcher with your name, logo and one click onto your server See themes ›
Kaynaklar / Modlar / Command Keys

Command Keys

A powerful command macro mod.

ModlarÜcretsiz1.19 – 26.x
geliştiren: NotRyken · Modrinth üzerinden listelendi
İndir › Install with the launcher

Opens Modrinth · 3,226,152 downloads there

Command Keys ekran görüntüsü 1Command Keys ekran görüntüsü 2Command Keys ekran görüntüsü 3

Ne yapar

A powerful command macro mod.

Command Keys, NotRyken tarafından yapılmış bir kaynak. Desteklediği sürümler: Minecraft 1.19 – 26.x. Modrinth üzerinde 3,226,152 kez indirildi. Son güncelleme 09.10.2026 tarihinde çıktı.

Desteklenen sürümler

26.x1.211.201.19

Sürüm geçmişi

Command Keys, 14.07.2023 tarihinden beri Modrinth üzerinde 231 sürüm yayınladı. Bunların 66 tanesi son bir yılda çıktı. En yenisi 09.10.2026 tarihinde çıkan 3.104.1+26.3. Minecraft 26.3 için yapıldı. Fabric üzerinde çalışır. İndirme boyutu 265 KB.

SürümYayın tarihiMinecraftTür
3.104.1+26.309.10.202626.3Kararlı
3.104.1+26.309.10.202626.3Kararlı
3.103.2+26.209.10.202626.2Kararlı
3.103.2+26.209.10.202626.2Kararlı
3.102.5+26.1.209.10.202626.1, 26.1.1, 26.1.2Kararlı

GitHub'daki son sürüm

Command Keys açık kaynaklıdır. GitHub'daki en yeni sürümü 09.10.2026 tarihinde yayınlanan v3.104.1+26.3-NeoForge.

Changelog

Öncekiler: v3.104.1+26.3-Fabric (09.10.2026), v3.103.2+26.2-NeoForge (09.10.2026).

Yazarın Modrinth açıklaması

CommandKeys

A powerful command macro mod.

Features

  • Multiple commands per macro
  • Multiple macros per keybind
  • Optional delay timing between commands
  • Efficient keybind conflict management with modifier key support
  • Five modes:
  1. Send all commands when the key is pressed
  2. Cycle through commands, one per keypress
  3. Repeat on a configurable interval
  4. Select a random message and send
  5. Type the command in chat, but don't send it
  • Profiles with automatic switching based on server address or world name
  • Fully custom GUI for easy configuration

Usage

Profiles

Automatic Switching

  • When you join a world/server, the name/address will be checked against the list of profiles. If

there is a profile linked to that world/server, it will be activated. Otherwise, the default
profile will be used.

  • Use the S and M buttons to make a profile the default for singleplayer or multiplayer.

Manual Switching

  • To activate a profile manually, click the up-arrow button on the left.
  • Click the link button to link the profile to the world/server for future automatic activation.
  • Click the settings button to rename the profile or remove links.

Macros

Access

  • Edit a profile by clicking the large button on the profile selection screen, or by pressing the

edit key
(default: K) in-game.

Binding Keys

  • You can bind almost any keyboard key or mouse button to a macro, similar to Minecraft's own

Controls. However, you can also bind any pair of keys; just press one while holding the other (
e.g. press 'T' while holding
'Shift').

Conflict Strategy

  • If a key is already in use by Minecraft, you can choose a conflict strategy;
  • Submit: The macro will be ignored, the Minecraft keybind will function normally.
  • Assert: The macro and the Minecraft keybind will both function.
  • Veto: The macro will function, the Minecraft keybind will be cancelled (if possible).
  • Avoid: The macro will not work in-game, but you can still activate it by pressing the key

while on the edit screen (with nothing selected). For example, if you have a macro bound to W,
press K then W to activate it.

Send Mode

  • Send: All commands for the macro will be sent. You can configure delays between commands.
  • Type: The first command will be typed into the chat box, but not sent.
  • Edit: A GUI will be shown to allow you to enter a replacement for the %edit% placeholder, then

the first message will be sent.

  • Cycle: The commands will be cycled through, with one command sent each time you press the key.
  • Note: In Cycle mode, if you need more than one command to be sent for a single key-press, enter

those commands into a single box, separated by pairs of commas (e.g.
/tick freeze,,/say Stopped).

  • Random: A message will be chosen at random and sent each time the key is pressed.
  • Repeat: Like Send, but the macro will be repeated (delay is configurable) until you press the

key again.

Placeholders

  • Simple Placeholders
  • %lastsent%: The most recently-sent message or command in history, if any.
  • %lastcmd%: The most recently-sent command in history, if any.
  • %clipboard%: The contents of the clipboard, if any.
  • %myname%: Minecraft username.
  • %pmsender%: The name of the sender of the most recently-received private message, if any. (

Searches max of 50).

  • %pos%: The integer coordinates of the player (x y z).
  • %x%: The integer X coordinate of the player. Also available for Y and Z.
  • %lpos%: The integer coordinates of the block the player is looking at, if any. Also provides

%lx%, %ly%,
%lz%.

  • Regex Placeholders
  • %#(.*)%: Regex Group 1 from the most recently-received message matching the regex following

the #, if any. Note: regex pattern must have at least 1 capturing group.

  • %clipboard#(.*)%: The contents of the clipboard, if any, verified to match a regex pattern

following the

. This can be used to prevent unintentional exposure of clipboard contents. E.g. use

%clipboard#^-?\d+ -?\d+ -?\d+$% to only send the clipboard contents if it's formatted like a
set of coordinates.

  • %pos([FBLR])(\d+)%: %pos% but offset some number of blocks in a direction relative to the

cardinal direction that the player is nearest to facing. E.g. use %posL20% to get the
coordinates 20 blocks to the player's left.

  • %x([+-]\d+)%: %x% but offset some number of blocks. E.g. use %x-10% to get the X

coordinate 10 blocks to the player's West. Also available for Y and Z.

  • %lpos([FBLR])(\d+)%: As per pos above but for the block the player is looking at, if any.
  • %lx([+-]\d+)%: As per x above but for the block the player is looking at, if any.

Dependencies

Fabric: Fabric API, ModMenu

NeoForge: None

Compatibility

If you encounter issues, please report on Discord or GitHub.

Contact

Yazan: NotRyken. Resimli halini Modrinth sayfasında oku.

Command Keys nasıl kurulur

  1. Bu mod yalnızca senin oyununda çalışır. Sunucuların buna ihtiyacı yok, bu yüzden her sunucuda kullanabilirsin.

  2. Minecraft 1.19 – 26.x için Fabric, Quilt, Forge ve NeoForge kur.

  3. İhtiyaç duyduğu modları ekle: Mod Menu.

  4. .jar dosyasını Modrinth üzerinden indir ve .minecraft klasöründeki mods klasörüne koy.

  5. Minecraft'ı Fabric profiliyle başlat.

  6. CraftRank Launcher ile bu adımları atlayabilirsin: Modlar'ı aç, Command Keys ara ve Kur'a tıkla.

Uyumluluk

Minecraft sürümleri
26.x, 1.21, 1.20, 1.19
Çalıştığı yer
Fabric, Quilt, Forge, NeoForge
Nerede çalışır
Yalnızca istemci (senin oyunun)
Sürüm türü
Java
Gerekenler
Mod Menu
Lisans
Kullanımı ücretsiz
Fiyat
Ücretsiz
Bakım
Aktif olarak güncelleniyor (10.11.2026)

Sorular

Command Keys, Minecraft 26.x ile çalışır mı?

Evet. Command Keys, Minecraft 26.x sürümünü destekliyor. Desteklenen tüm sürümler: 26.x, 1.21, 1.20, 1.19.

Command Keys ücretsiz mi?

Evet. Command Keys, Modrinth üzerinden ücretsiz indirilebilir.

Command Keys istemci tarafı mı, sunucu tarafı mı?

İstemci tarafı. Command Keys kendi mods klasörüne kurulur ve modsuz sunucular dahil her sunucuda çalışır.

Command Keys başka bir şeye ihtiyaç duyar mı?

Evet: Mod Menu. Bunu Command Keys öncesinde kur.

Command Keys hâlâ güncelleniyor mu?

Evet. Son güncelleme son 24 saat içinde çıktı.

Yorumlar

–★★★★★
0 yorum
50
40
30
20
10

Yorum yazmak için giriş yap.